NTNU - knowledge for a better world

The Norwegian University of Science and Technology (NTNU) in Trondheim represents academic eminence in technology and the natural sciences as well as in other academic disciplines ranging from the social sciences, the arts, medicine, teacher education, architecture to fine art. Cross-disciplinary cooperation results in innovative breakthroughs and creative solutions with far-reaching social and economic impact

 

Faculty of Engineering

Department of Structural Engineering

 

PhD position in Rational Alloy Design (SO – IV 150/18): Modelling technology (PhD4)

A PhD position is available at the Department of Structural Engineering. The appointment has a duration of 3 years with the possibility of until 1-year extension with 25% teaching duties in agreement with the department. The position is financed by the NTNU initiative NTNU Digital Transformation and is a part of the project Rational Alloy Design - ALLDESIGN, and has a special responsibility for the sub-project Finite element modelling of alloy components.

  

Information of the ALLDESIGN project

The primary objective is to create a digital materials design platform for intermetallic alloy design. The project focuses on aluminium-based alloys, which are of great importance for the Norwegian industry. ALLDESIGN will investigate the physical processes behind slow-diffusion precipitation phenomena starting from atomistic scale and in silico. Our goal is to develop efficient theoretical methods to understand materials properties at different length and time scales and to limit costly trial-and-error measurements in the laboratory. Such output can considerably help in materials screening and finding optimal thermochemical treatment conditions. Complementary to the theoretical work will be experimental high-resolution characterization (including development of data processing algorithms) and validation of the theoretical results. Finally, the data from the multiscale modelling approach will be used for digitalization of the alloy manufacturing process in the newly invested 3D stretch-bending machine. The project involves a simultaneous recruitment of 1 post-doctoral fellow and 4 PhD students in complementary research areas within the same NTNU digital transformation call.

 

Job description

The theme of the PhD research is modelling of the mechanical response of aluminium components. This project aims at determining the optimal way of simulating the formability and end-use of aluminium components. A large part of the project will be dedicated to the evaluation of advanced continuum modelling approaches and to determine an optimal solution in terms of accuracy and numerical cost.

 

We are seeking a person with good understanding of mechanical engineering and/or structural engineering with strong motivation and experience in modelling / simulations with the finite element method, preferably on topics related to aluminium.

 

Detailed information on our PhD programs is found at: http://www.ntnu.edu/nt/research/phd

 

Qualifications
The applicant must have an educational background (MSc or equivalent) in mechanical engineering or structural engineering or equivalent and a strong background and experience within at least one of the following fields:

  • Numerical/mathematical modelling and simulations with the finite element method
  • Continuum plasticity
  • Skills in model implementation/programming in Fortran, C, Python or similar computer languages.

Experience with methods for mechanical testing will be considered as an advantage.

 

The successful candidate should be creative, with a strong ability to work problem oriented. He/she should also enjoy interdisciplinary research and take keen interest in learning and working in teams.

 

The regulations for PhD programmes at NTNU state that a Master degree or equivalent with at least 5 years of studies and an average grade of A or B within a scale of A-E for passing grades (A best) for the two last years of the MSc is required. Candidates from universities outside Norway are kindly requested to send a Diploma Supplement or a similar document, which describes in detail the study and grade system and the rights for further studies associated with the obtained degree:

 

http://ec.europa.eu/education/tools/diploma-supplement_en.htm

 

The position requires spoken and written fluency in the English language. Applicants from non-English-speaking countries outside Europe must document English skills by an approved test. Approved tests are TOEFL, IELTS and Cambridge Certificate in Advanced English(CAE) or Cambridge Certificate of Proficiency in English (CPE).

 

Terms of employment

The appointment of the PhD fellows will be made according to Norwegian guidelines for universities and university colleges and to the general regulations regarding university employees. Applicants must agree to participate in organized doctoral study programs within the period of the appointment and have to be qualified for the PhD-study.

 

NTNU’s personnel policy objective is that the staff must reflect the composition of the population to the greatest possible extent.

 

PhD Candidates are remunerated in code 1017, and are normally remunerated at gross NOK 436 900 before tax. There will be a 2 % deduction to the Norwegian Public Service Pension Fund from gross wage.

 

Engagement as a PhD Candidate is done in accordance with “Regulation concerning terms and conditions of employment for the posts of post-doctoral research fellow, research fellow, research assistant and resident”, given by the Ministry of Education and Research of 19.07.2010. The goal of the positions is to obtain a PhD degree. Applicants will engage in an organized PhD training program, and appointment requires approval of the applicants qualifications plan for a PhD study within three months from the date of commencement.

 

The engagement is to be made in accordance with the regulations in force concerning State Employees and Civil Servants. The positions adhere to the Norwegian Government's policy of balanced ethnicity, age and gender. Women are encouraged to apply.

  

Information about the department

The Department covers the subject areas: structural mechanics, impact and crashworthiness, structures in aluminium, -concrete, -steel and -timber, in addition to concrete technology, biomechanics and nanomechanics. The structural laboratories at the Department are equipped for high quality experimental activities. Further information is available at: https://www.ntnu.edu/kt

 

 

The application

Applications with CV, certificates from both Bachelor and Master, possible publications and other scientific works, copies of transcripts, (copies of documentation on English language proficiency test) and reference letters should be submitted.

 

Further information can be obtained from associate professor David Morin, Department of Structural Engineering, NTNU, Tel. +47 465 42 691, E-mail: david.morin@ntnu.no

 

 

Applications must be submitted electronically through www.jobbnorge.no.

Applications submitted elsewhere will not be considered.

The reference number of the position is: IV 150/18

  

 

Application deadline: 27.5.2018


Søk stillingen

Om stillingen

  • Søknadsfrist
    27. mai 2018
  • Arbeidsgiver
    NTNU - Norwegian University of Science and Technology
  • Nettside
  • Kommune
    Trondheim
  • Arbeidssted
    Department of Structural Engineering
  • Jobbnorge-ID
    151390
  • Intern-ID
    2018/11580
  • Omfang
    Heltid
  • Varighet
    Vikariat/Midlertidig

Om søknader

  • Søknader for denne stillingen registreres i et elektronisk skjema på jobbnorge.no
  • Du må fylle ut: Standard CV
  • Vennligst opplys i søknaden hvor du først så stillingsutlysningen!

Se mer

Finn andre stillinger